Argox AI-6821 - Miscellaneous; Status Lights Control; Fill-In Light Intensity

66
3.6 Miscellaneous
This section describes settings that give you
finer control over your scanner.
3.6.1 Status lights control
The status lights glows when you scans a bar
code and get acknowledged from your cradle.
You can turn off all the lights using this
setting, except for the light that indicates a
Bluetooth connection is established between
your scanner and cradle.
(*) Default
Option
Description
Bar Code
*On
The status lights
glow according to
the operation.
Off
The status lights
don’t glow except
for Bluetooth
connection.
3.6.2 Fill-in light intensity
When you turn on the aiming pattern, you’ll
notice that the pattern is encompassed by the
fill-in light, which helps your scanner see bar
codes clearly.