Argox AI-6821 - Sleep Mode; Time to Sleep (Cradle )

38
Option
Description
Bar Code
*On
You scanner stores
data in its storage
when it lost
Bluetooth
connection.
Off
No data is stored.
3.3.3 Sleep mode
To save battery power, you can put your
scanner into sleep if it doesn’t work in a
certain amount of time. To wake it up, just
pull the trigger. Note that your scanner needs
2-3 seconds to wake up, since the engine
needs a little time to start.
Time to sleep (cradle )
(*) Default
Option
Description
Bar Code
*0
Turn off the Sleep
mode.
1
Go to sleep after
being idle for 10
minutes.