149
5.2 Bar code issues
My scanner doesn’t read a bar code
properly.
￭ Reset your scanner.
￭ Check the quality of your bar codes.
Wrinkled, smudged or torn bar codes
won’t be read by your scanner.
￭ Are your bar codes too close to each
other? Cover the bar codes you don’t
need and scan the target again.
The data isn’t sent to my computer.
￭ Did you establish the connection between
your scanner and cradle?
￭ Did your scanner connect to other
Bluetooth device?
￭ Make sure the USB cable is tightly plugged
into your cradle and computer.
￭ Your scanner is connecting to another
cradle. Break their connection and
connect your scanner to your cradle.
To Next Page
Loading...
