Argox AI-6821 - Volume and Vibration; Good Scan Beep Duration

30
Option
Description
Bar Code
00-FF
Suffix length: one
character
Default: 0x0D
￭ Suffix 2
Add one character at the end of Suffix 1.
Option
Description
Bar Code
00-FF
Suffix length: one
character
Default: 0x0A
3.2 Volume and vibration
When you use your scanner, you might want
to adjust its volume or vibration to adapt to
your workplace. This section describes how to
use them.
3.2.1 Good scan beep duration
You can decide how long your scanner beeps
after it gets a good scan. The duration is from
0.1 to 0.9 second.
(*) Default
Option
Description
Bar Code
*1
0.1 second (MIN)