Argox AI-6821 - Settings; Flow Control (Cradle Only)

48
3.4.2 RS-232 settings
RS-232 settings provide options that can be
used to control data flow.
Flow control (cradle only)
Flow control determines how your computer
and cradle control their communication.
(*) Default
Option
Description
Bar Code
*None
Your computer and cradle
only use TxD and RxD
signals for
communication. No
hardware or software
flow control is used.
RTS/CTS
It is hardware flow
control. If your scanner is
ready to send bar code
data to your computer, it
sends an RTS signal, and
waits to receive a CTS
signal from your
computer. If your scanner
doesn’t receive a CTS,
you’ll hear an error beep
from it.
Xon/Xoff
It is software flow control.
When your computer is
unable to receive data, it
sends an Xoff signal to