140
GS1 Databar
Convert_GS1_DataBar_to_UPCEAN
This attribute only affects GS1 DataBar and
GS1 DataBar Limited bar codes not decoded
as part of a composite bar code. It removes
the leading “010” from DataBar and DataBar
Limited bar codes that encode a single zero as
the first digit, and sends the bar code as EAN-
13.
For bar codes starting with two or more zeros
but not six zeros, it removes the leading
“0100” and send the bar code as UPC-A. After
conversion, the data is affected by the
UPCA_Preamble attribute. Neither the
system character nor the check digit can be
removed.
(*) Default
To Next Page
Loading...
