Argox AI-6821 - Align Mode; Reset Your Scanner

69
pattern during the scan. You can turn it off.
(*) Default
Option
Description
Bar Code
*On
Turn on the
aiming pattern.
Off
Turn off the
aiming pattern.
3.6.7 Align mode
Decode only the bar codes aligned under the
center of the aiming pattern.
(*) Default
Option
Description
Bar Code
On
Turn on the Align
mode.
*Off
Turn off the Align
mode.
3.6.8 Reset your scanner
By resetting your scanner, you can return your
scanner to the state it was in when you
receive it. This can help you solve some
problems caused by settings changed
between scans.