Argox AI-6821 - Page 80

70
There are two ways to reset your scanner.
￭ Scan the bar code
Scan the following bar code to reset your
scanner.
Option
Description
Bar Code
Reset
scanner
Restore your
scanner to factory
settings.
￭ Press and hold the RESET button
Press and hold the RESET button until you
hear the startup sound.
Remember the following when resetting your
scanner:
1. If your scanner is connected to your
cradle, when you scan the Reset scanner
bar code or press the RESET button, you
reset both of your scanner and cradle.
2. If your scanner is not connected to your
cradle, when you scan the Reset scanner
bar code, you only reset your scanner;
when you press the RESET button, you
only reset your cradle.