10
2. Connect the USB or the RS-232 cable to
your computer.
Note 1 If you’ve purchased the USB
pack, you can charge your scanner by
connecting the USB cable to your
computer. You can also charge it by
connecting a power supply (optional) to
your USB cable. The charging time is
shorter with a power supply.
Note 2 If you’ve purchased the RS-232
pack, connect the power supply to the
RS-232 cable and the wall outlet.
3. Place your scanner on your cradle to
charge it to full (cradle’s LED glows
green).
4. Scan the Data Matrix code at the bottom
of your cradle to establish the connection
between your scanner and cradle.
5. To test your scanner, start a text
processing program like Notepad or
Word. Scan a bar code and see if the data
can be sent to your computer. If it’s
successful, you’ll hear a beep and the bar
code data shows in the program.
To Next Page
Loading...
