13CS-175-275-575 Series • LCD User Guide
Resetting fire detectors
LCD Message: Alarm message after a fire alarm.
User Action: Type your user code to turn the system off.
LCD Message: Your system is turned off, and the fire detector
has been activated.
User Action: Press * 7 in order to reset the fire alarm
The smoke detector has been reset. This may take 10 seconds.
The fire LED (red) will turn off.
User Action: Press #
LCD Message: Your system is turned off, and the fire detector
has been reset. The fire LED goes off if all detectors have been reset.
$èS
@S
System Ready
Type code to arm
ALARM
fire alarm
8 Alarm Mem.
fire alarm
System Ready
Type code to arm
e S
To Next Page
Loading...
