What to do if nothing happens when pushing a button on Arjo Bathroom Aid?
If nothing happens when you push a button on your Arjo Bathroom Aid, ensure that the emergency stop button is not pushed down. If it is, reset it until it pops up.
Why lifting arm “in/out” of the Arjo Malibu/Sovereign bathtub does not work?
If the lifting arm “in/out” function of your Arjo Malibu/Sovereign bathtub isn't working, first ensure the bathtub is in its lowest position. If the issue persists, check the hand control and cables, and replace them if necessary.
What to do if there is no water flow during shower only in Arjo Bathroom Aid?
If there is no water flow from the shower handle within 30 seconds, turn the shower off. If there is a bad spray pattern, check the shower handle and replace it if necessary.
What to do if the LED on the disinfection button flashes green on Arjo Bathroom Aid?
If the LED on the disinfection button flashes green and a buzzer alarm sounds when you push the button on your Arjo Bathroom Aid, it means the disinfectant bottle is empty. Replace it.
What to do if Malibu/Sovereign bathtub can not be raised when the lifting arm is outside the bathtub Arjo Bathroom Aid?
If your Arjo Malibu/Sovereign bathtub cannot be raised when the lifting arm is outside the bathtub, swing the lifting arm into the Malibu/Sovereign bathtub and then check the hand control.
What to do if lifting arm “up/down” and “in/out” of the Malibu/Sovereign bathtub does not work on Arjo Bathroom Aid?
If the lifting arm’s “up/down” and “in/out” functions are not working on your Arjo Malibu/Sovereign bathtub, check the hand control and cables. Replace them if necessary.
What to do if there is no water flow or bad water flow during Malibu/Sovereign bathtub filling and shower on Arjo Bathroom Aid?
If you experience no water flow or bad water flow during Malibu/Sovereign bathtub filling and shower, check the incoming water flow and check/clean the filters.
Why HI/LO LED is flashing yellow when trying to lifting arm “out” of Malibu/Sovereign bathtub on Arjo Bathroom Aid?
If the HI/LO LED is flashing yellow when you try to move the lifting arm “out” of the Malibu/Sovereign bathtub, it indicates that the Malibu/Sovereign bathtub is not in the lowest position. Lower the Malibu/Sovereign bathtub to its lowest position.
What to do if nothing happens when pushing a button on the hand control of Arjo Bathroom Aid?
If nothing happens when pushing a button on the hand control of your Arjo Bathroom Aid, replace the hand control.
What does battery level LED flashing green mean for Arjo Bathroom Aid?
If the battery level LED is flashing green with mains on and the battery connected on your Arjo Bathroom Aid: 1. The battery is charging; it is fully charged when the green LED light becomes steady. 2. If the battery level LED never becomes steady, the battery needs to be replaced during the next service.
General| Brand | Arjo |
|---|---|
| Model | Malibu |
| Category | Bathroom Aid |
| Language | English |
Information on service routines and contacting Arjo for support.
Requirements for installation by appropriately trained personnel.
Criteria for assessing patient suitability for use with the equipment.
Information on the expected service life of the equipment and its parts.
Critical safety warnings to prevent injury, falling, or entrapment.
Requirements for finishing the floor and walls before installation.
Steps to perform before each use, including checks and disinfection.
Steps to follow for initial setup and first use of the bathtub.
Identifies all parts and accessories of the Malibu/Sovereign bathtub.
Overview of basic and assisted disinfection models.
Instructions for using the hand control for lift and bathtub functions.
Operation of the bathtub's main control panel for raising/lowering.
How to enable/disable patient lock-out for safety.
Information on the optional battery back-up for power failures.
Explains the meaning of different LED indicators on the control panel.
Operation of the pop-up drain knob and emergency stop button.
How to attach, remove, and use the armrests for safety and access.
Step-by-step guide for attaching and removing the seat.
Usage of the neck pillow, auto flush, and auto fill functions.
Explanation of scalding protection and temperature display features.
How to adjust and use the shower function.
Instructions for correctly attaching and buckling the safety belt.
Steps for adjusting and ensuring the safety belt is properly fastened.
How to secure the safety belt when not in use.
Procedure for detaching the safety belt from the chair.
How to use the optional disinfection unit and its components.
How to apply and release brakes on the transfer chassis.
Warnings and checks for safe use of the transfer chair.
Guidance on using the transfer chair with a toilet.
How to operate the Air Spa system for massage.
Information on intensity settings and auto shut-off.
Detailed steps for connecting the transfer chair to the lifting arm.
Detailed steps for safely disconnecting the transfer chair from the lifting arm.
Steps for transferring a patient into the Malibu/Sovereign bathtub.
Safety warnings and checks during patient transfers.
Guidance on rotating the chair into the bathtub.
Steps for safely transferring a patient out of the bathtub.
Guidelines for distributors and renters regarding transport and installation.
Requirements for preparing the home environment for use.
Safety precautions and recommendations for storing the equipment.
Recommended space requirements for wall-mounted installations.
List of accessories needed for effective disinfection.
Specifies the approved disinfectants for use with the equipment.
Actions to limit bacterial growth during installation.
Daily use practices to prevent bacterial formation.
Step-by-step guide for replacing the disinfectant bottle.
Detailed steps for cleaning and disinfecting using a spray bottle.
Steps for cleaning and disinfecting using the built-in disinfection unit.
Schedule outlining routine checks and maintenance tasks for the bathtub.
Duties including cleaning, disinfection, and weekly checks by caregivers.
Cleaning and disinfection procedures performed between patient uses.
Checks for hand controls, castors, functionality, neck pillow, and safety belt.
Thermostat mixer testing and cleaning of incoming water filters.
Replacement of the safety belt.
Replacement of the seat and checking its expiry date.
Table of common issues and their corresponding actions.
Details on weight, dimensions, load capacity, and temperature limits.
Specifications for voltage, power, lifting stroke, and timing.
Operating conditions, storage, mains, and water connection specifications.
Lists products compatible with the Malibu/Sovereign bathtub.
Guidelines for recycling components and disposing of the product.
Explains the meaning of various labels on the equipment.
Explains the meaning of symbols used on the equipment.
Lists standards and certificates relevant to the product's design and safety.
Manufacturer's declaration regarding electromagnetic emissions.
Manufacturer's declaration regarding electromagnetic immunity.
Lists available parts and accessories with part numbers.
To Next Page
