Need help?Do you have a question about the Arkel ARCUBE and is the answer not in the manual?
General| Brand | Arkel |
|---|---|
| Model | ARCUBE |
| Category | Control Unit |
| Language | English |
Wiring diagram for brake resistors.
Connections for motor phases and PTC sensors.
Wiring for mechanical brake activation.
Wiring for encoder signal transmission.
Connection for the motor cooling fan.
Connection of the optional battery pack.
Connection for the uninterruptible power supply.
Preparing the system and required bridging for auto tuning.
Configuring motor and system parameters for auto tuning.
Step-by-step guide to execute the auto tuning process.
Configuring car call inputs and FX-Cube board settings.
Settings for serial and parallel landing call wiring.
Inspection board for car top communication and calls.
Landing call board for parallel systems.
Board for synchronous encoder connection.
Board for asynchronous encoder connection.
Board for serial landing calls without indicator.
Board for serial landing calls with dotmatrix indicator.
Board for serial landing calls with 3-part dotmatrix indicator.
Board for serial landing calls with LCD display.
Serial inspection board for car calls.
Car panel controller board for calls.
Procedure to clear persistent error messages.
Sockets for bridging door safety chains during maintenance.
Priority and usage of inspection terminals.
Steps to return to normal mode after pit inspection.
Comprehensive guide to error codes H1-H62, their causes, and solutions.
To Next Page
