Arkray Assure PRISM MULTI - Page 13

6
SECTION
B
Step 8: Setting the Sound On/OFF
On pressing or , the screen will display On or OFF. Press the
buttontoconrmtheselection.
The meter will beep in the following instances if set to On:
• When you press the button and/or button to turn on the
meter or to set the alarm.
• When the test strip is inserted in the meter.
• When the blood or control solution sample is absorbed into
the test strip and the test starts.
• When the test result is displayed.
If the sound is set to OFF, none of the sound functions will work.
NOTE
•
In a multi-patient setting, we do not recommend using the memory feature including
post-meal alarms, pre-set blood glucose or averaging. Results stored in the memory are
notrelatedtoaspecicpatient.
NOTE
• symbol is displayed only when the sound is set to OFF.
• At any stage, press the button for 3 seconds to exit SET mode and turn off the meter.
• Press and hold button to quickly scroll through the numbers.