Arlo Pro 5S 2K - Lower Power Mode

18Get Started
Pro 5S 2K Spotlight Camera
User Manual
Lower Power Mode
Lower Power Mode is a feature that allows your Arlo device to extend its battery life by
automatically activating at a certain battery level.
• When motion is detected and your camera is triggered to record, your camera will take a
snapshot of the motion.
• You will receive a push notication about the snapshot and it’ll also be saved in your Feed.
• If motion continues aer the snapshot is received, your camera will take additional
snapshots. The camera will wait at least ten (10) seconds between snapshots.
• You can still view your camera’s live stream by tapping on the push notication or from
within the Arlo Secure app.
• If your Arlo Pro 5S 2K Camera is connected to an Arlo Home Security System with
SecureLink, the camera will only communicate using the SecureLink connection, to save
additional power.
To enable Low Power Mode on your device automatically:
1. Open the Arlo Secure app.
2. Tap Devices.
3. Tap the Menu icon
.
4. Click Power Management.
5. Slide the toggle for Auto Low Power Mode to the right (on) or le (o).
6. Move the slider le or right to increase or decrease the Low Power Mode Threshold.
Note: Your camera will switch to Low Power Mode when the battery drops below the set
threshold to extend your camera’s battery life. When the battery recharges to 10% above
your set threshold, the camera will switch back into its previous Power Mode. When you
disable the Auto Low Power Mode, the threshold will disappear.
To enable Low Power Mode on your device (manually):
1. Open the Arlo Secure app.
2. Tap Devices.
3. Tap the Menu icon
.
4. Click Power Management.
5. Tap on Power Mode.
6. Select Low Power Mode.