72SmartHub SD Card Storage
Pro 5S 2K Spotlight Camera
User Manual
Safely eject an SD card
It’s important to safely remove the microSD card from your SmartHub. If you remove an
SD card while information is being recorded on it, the SD card might become permanently
unusable or the les on the card might be corrupted.
1. Open the Arlo Secure App.
2. Tap Devices.
3. Tap SmartHub/Base Station/Bridge > Local Storage.
4. Tap Safely Eject SD Card.
5. Wait for the Unmounting SD Card progress message to close.
6. Remove the SD card from your SmartHub by pressing in on the edge of the card until it
ejects.
Do not interrupt power to the SmartHub or remove the SD card while unmounting the SD
card.
7. The SD card icon changes from amber
to gray indicating that no microSD card is in
the slot.
Arlo SD card recording is disabled until you insert another SD card.
View videos on a microSD card
To view Arlo videos saved on a microSD card, you must remove the microSD card from your
SmartHub and use a microSD card reader.
The microSD card reader can be part of your computer or a memory card reader with a USB or
micro USB connector. If you purchase an SD card reader, make sure that you choose one that
can read microSD cards.
1. Safely eject the microSD card.
For more information, see Safely eject an SD card on page 72.
2. Insert the microSD card into the slot in your card reader.
3. Wait for the microSD card to appear in the list of available drives on your computer, and
then open the drive folder to view the les on your microSD card.
To Next Page
Loading...