Arlo Pro 5S 2K - Turn USB Recording off and on; Turn Local 2 K Recording off and on; Change the USB Device Overwrite Setting

66Smar tHub or Base Station USB Storage
Pro 5S 2K Spotlight Camera
User Manual
Turn USB recording o and on
1. Open the Arlo Secure App.
2. Tap SmartHub/Base Station/Bridge
3. Select the SmartHub.
4. Tap Storage Settings > USB Device Recording.
Turn local 2K recording o and on
The SmartHub and base station recordings saved onto the USB device are 1080p, but you can
change this setting and save Pro 5S 2K Spotlight Camera 2K recordings onto the USB device.
Note: Local 2K recording from Pro 5S 2K Spotlight Cameras is supported in Arlo SmartHub
and Base Station models VMB5000, VMB4540, and VMB4000.
1. Open the Arlo Secure App.
2. Tap Devices.
3. Tap SmartHub/Base Station/Bridge
4. Select the SmartHub.
5. Tap Storage Settings > Best Local Recording.
Local 2K recording toggles o and on.
Change the USB device overwrite setting
By default, if the USB storage device lls up, the oldest Arlo recording is erased to make
room for new recordings. Files on the USB device that aren’t in the Arlo folder aren’t deleted
to make room for Arlo recordings. You can change the setting so that no Arlo recordings are
automatically erased.
1. Open the Arlo Secure App.
2. Tap Devices.
3. Tap Base Station & Bridge > Storage Settings.
4. Tap Overwrite Automatically.
The overwrite setting toggles o and on.