Arlo Pro 5S 2K - Control Whether the Spotlight Turns on When Motion Is Detected at Night; Change Audio Sensitivity

41Modes, Rules, and Alerts
Pro 5S 2K Spotlight Camera
User Manual
6. Under Then do the following, tap Edit next to Record video.
7. Select Record until activity stops (up to 300 sec).
Control whether the spotlight turns on when
motion is detected at night
Unless you changed its settings, your camera automatically turns on its spotlight when it
detects motion at night. Your camera detects motion when it’s in Armed mode or another
mode that uses a rule for detecting motion. When the spotlight turns on at night, it allows
your camera to record video in color.
Note: You can manually turn the spotlight on and o at any time by selecting your camera
and tapping Spotlight. See Turn the camera spotlight on and o manually on page 31.
To control whether the spotlight turns on when motion is detected, you can change the low-
light settings for your camera.
1. Open the Arlo Secure App.
2. Tap Devices.
3. Tap the camera.
4. Tap Video Settings > Low Light Settings.
5. Tap Spotlight to toggle the setting o and on.
Change audio sensitivity
1. Open the Arlo Secure App.
2. Tap Routines.
3. Tap Mode.
4. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
5. Tap Edit
next to the mode.
6. Under If the following, tap Edit
next to Audio is detected.
7. Move the slider to the desired level of audio detection.