Arlo Pro 5S 2K - Detect audio alarms with your camera

45Modes, Rules, and Alerts
Pro 5S 2K Spotlight Camera
User Manual
6. Select the trigger device and tap Next.
This is the camera that detects motion and/or sound.
7. Enter the trigger device settings for the When motion is detected and When audio is
detected sections and then tap Next.
8. Use the slider to set the motion sensitivity for the trigger device and tap Next.
Higher motion sensitivity settings usually trigger your camera to capture videos more
frequently.
9. Set the audio sensitivity for the trigger device and tap Next.
10. Select an action device and tap Next.
This is the Arlo device that performs an action when the trigger device detects motion
or sound. You can select the same Arlo device you’re using as a trigger or a dierent Arlo
device.
11. Select an action and tap Next.
You can select Record video,Turn alarm ON, or Do nothing.
If you’re using a computer web browser, you can also specify the recording time setting.
12. Select the notications for Arlo to send when motion or audio is detected and then tap
Next.
13. Review your settings and tap Save.
Detect audio alarms with your camera
To use Alarm Detection, you need an Arlo Secure subscription. For information about Arlo
Secure, visit What are the available Arlo subscription plans and how much cloud recording is
available?
Alarm Detection noties your Arlo Secure App when your camera detects the sound of a
smoke or carbon monoxide (CO) alarm going o. Your camera records until activity stops or
for the length of time you specify (up to a maximum of 300 seconds).
Compatible alarms
We recommend that you test the compatibility of your alarm with the Alarm Detection feature.
The Alarm Detection feature recognizes these alarms:
• Smoke detectors with industry-standard T3 alarms (three intermittent beeps, followed by
a period of silence).