61Change Your Settings
Pro 5S 2K Spotlight Camera
User Manual
Note: You can manually turn the spotlight on and o at any time from the camera feed by
tapping Spotlight
. You can also use the Low Light settings to control whether the spotlight
comes on automatically when your camera detects motion at night.
To change the low light settings for the spotlight:
1. Open the Arlo Secure App.
2. Tap Devices.
3. Select Edit.
4. Select Settings on the top right corner of the camera.
5. Tap Video Settings > Low Light Settings.
6. Adjust the settings to customize your spotlight:
• Spotlight. Toggle the spotlight on and o. When the Spotlight setting is set to the On
position, the spotlight automatically turns on when your Arlo camera detects motion
at night.
• Color. Toggle color video recording at night on and o.
• Behavior. Select the spotlight behavior that you prefer: Constant, Flash, or Pulsate.
• Brightness. Use the slider to adjust the brightness level
• Night Vision. Toggle Night Vision on and o.
Change the video mode to select the eld of view
The video mode controls the eld of view setting for the camera. The eld of view is the area
that the camera sees. You can set the video mode for your camera to Full (110 degrees), Wide
(125 degrees), or Super Wide (160 degrees).
To change the video mode:
1. Open the Arlo Secure App.
2. Tap Devices.
3. Select Edit.
4. Select Settings on the top right corner of the camera.
5. Tap Video Settings > Video Mode.
6. Tap a eld of view to apply it to your camera.
To Next Page
Loading...