Armstrong Emech G1 - 6 Keypad Operating Instructions; Dual Press Fail Safe Button Operation; Controller Type Selection

6.0 Keypad Operating Instructions
armstronginternational.com
6.0 Keypad Operating Instructions
6.1 ‘Dual Press’ Fail Safe Button Operation
6.2 Controller type Selection
When using the actuator control panel, at least two buttons must
be pressed simultaneously to activate any control.
At all times, either the set or mode is to be pressed in conjunction
with any other button. This is a fail-safe feature to prevent
accidental input.
Pressing mode + down (-) selects the particular controller type
required.
The control types available depend upon the type of actuator,
and always include ‘Positioner’ control mode, and ‘Temperature
Controller’ mode.
The modes are displayed as codes by the 4
lights on the right of the display.
Armstrong International
221
Armstrong Blvd., Three Rivers, Michigan, 49093 - USA
Phone (269) 279-3602 Toll Free (888) HOT-HOSE (468-4673)
33
Designs, materials, weights and performance ratings are
approximate and subject to change without notice. Visit
armstrong international.com/emech for up-to-date information.