Armstrong The Brain DRV80R - Installation DRV80

16
Armstrong International
Parc Industriel Des Hants-Sarts, 2ème Avenue No. 4, Haerstal, B-4040, Belgium
armstronginternational.com/brain
Installation - DRV80
Before fitting to the pipework, it is
recommended that connectors are fitted to
the inlets and outlet. This will enable the DRV
to be easily removed, if required.
Flush pipework thoroughly
(minimum of 5 minutes).
Fit the DRV to the pipework.
Attach the Electronics Module and secure
using the circlip supplied.
1
2
3
4
Hole markers inside the Electronics Module
case indicate where cables can be fitted for
options such as BrainScan® or an error relay.
If these are required but have not been prefitted,
contact Armstrong for further advice.