ARRI EVF-1 - Page 312

*XT = function available on ALEXA XT/XR only *ANAMORPH = requires Anamorphic Desqueeze License *DNxHD = requires DNxHD License *HS = requires
High Speed License *PLUS = ALEXA PLUS only *PLUS 4:3 = ALEXA PLUS 4:3 only *STUDIO = ALEXA STUDIO only *M = ALEXA M only *NON XT = only
available on ALEXA „Classic“ cameras *OG = settings and values introduced by the Open Gate Mode are not covered by this overview.
SUP 9.0
HOME
MENU
continued on next page
Options may differ
depending on selected
sensor mode.
Please note:
All differences
from the different
ALEXA-Menu‘s are being
indicated by annotations
(*
XT
or *
NON XT
).
WB
set WHITEBALANCE (2000K-11000K, Auto WB; 5600K;
and CC SHIFT)
add/rename/delete value
COLOR
}
(Look ON/OFF for REC 709)
SET LOOK
choose/delete/load look from SD
ARRI LCC look loaded by default
CDL CONF*
ALEXA XT
> set ip adress
CDL (On/Off)
*
ALEXA XT
set COLORPATH
EVF (Look ON/OFF for REC 709)
MON OUT (Look ON/OFF for REC 709)
INTERNAL
REC OUT
GAMMA
COLOR > GAMMA >>
INTERNAL (REC 709, LOG C, RAW
*
ALEXA XT
)
REC OUT (REC 709, LOG C)
MON OUT (REC 709, LOG C)H
EVF (REC 709, LOG C)
RECORDING menu
Internal >>
Mode (Off/ProRes/ARRIRAW)
Codec/HS Codec (ARRIRAW, DNxHD 145/220x/444,
ProRes 422 Proxy/422 LT/422/422 HQ/4444)
Resolution (HD (1920x1080)/2K (2048x1152/1536)
*XT/PLUS 4:3
)
Dual Recording (On/Off)
*NON XT
Prerecord >>
Prerecord (On/Off)
*PRORES
Buffer size (220MB/660MB/1100MB)
Quick format SxS Card 1/2
*NON XT
/Capture Drive
*XT
Erase SxS Card 1/2
*NON XT
REC OUT >>
Framerate (23.976/24/25/29.97/30/48/50/59.94/60fps)
HD-SDI format (422 1.5G SL/1.5G DL/3G SL/444 1.5 DL
444 3G SL/3G DL/RAW
*NON XT
1.5G DL/3G SL/3G DL
or MON OUT clone)
Scan format (psf/p)
Output range (Legal/Extended/Raw)
REC OUT fps sets sensor fps (On/Off)