*XT = function available on ALEXA XT/XR only *ANAMORPH = requires Anamorphic Desqueeze License *DNxHD = requires DNxHD License *HS = requires
High Speed License *PLUS = ALEXA PLUS only *PLUS 4:3 = ALEXA PLUS 4:3 only *STUDIO = ALEXA STUDIO only *M = ALEXA M only *NON XT = only
available on ALEXA „Classic“ cameras *OG = settings and values introduced by the Open Gate Mode are not covered by this overview.
SUP 9.0
MENU
continued on next page
MONITORING menu
Electronic viewfinder >>
Brightness (0-5)
Rotate image (On/Off)
Smooth mode (On/Off)
Surround view (On/Off)
Frame lines + status info >>
Frame lines (On/Off)
Surround mask (Black line/Color line/Mask 25%/50%/75%)
Center mark (Off/Dot/Cross)
Status info (On/Off)
Electronic horizon(On/Off)
LDS info (On/Off)
Peaking (Off/On) >>
Peaking (On/Off)
Peaking level (Low/Medium/High)
Anamorphic desqueeze*
XT/ANAMORPH
(Off/1.3x/2.0x/2.0xmag)
Zoom position (Centered/Eye level)
MON OUT >>
Framerate (23.976/24/25/29.97/30fps)
Scanformat (psf/p)
Surround view (On/Off)
Frame lines + status info >>
Frame lines (On/Off)
Surround mask (Black line/Color line/Mask 25%/50%/75%)
Center mark (Off/Dot/Cross)
Status info (On/Off)
Electronic horizon (On/Off)
LDS info (On/Off)
Camera index letter (On/Off)
Peaking (Off/On) >>
Peaking (On/Off)
Peaking level (Low/Medium/High)
False color (On/Off)
Anamorphic desqueeze*
XT/ANAMORPH
(Off/1.3x/2.0x/2.0xmag)
Frame lines >>
Frame line 1 (choose/add/delete; Off)
Frame line 2 (choose/add/delete; Off)
User rectangles >>
User rectangles (Off/Rect 1/Rect 2/Rect 1+2)
Set rect 1/2 >>
Top, Bottom, Left, Right (0-1000), Reset
Color (Red/Green/Blue/Yellow/Black/White)
Intensity (1-4)
RET IN path (EVF, MON OUT, EVF+MON)
Electronic horizonsensitivity (1x, 2x, 4x, 8x, 16x)
False color index >>
To Next Page
Loading...
