Repairs & Servicing
All repairs and servicing of the eSTOP™ shall be performed by ArrowES or its authorised service center.
Any services/repairs/modification or use of parts not approved by ArrowES voids any warranty and may
affect the safe performance of the eSTOP™.
Safe Transportation of the eSTOP™
The eSTOP™ shall be suitably packed to accommodate bumpy rides on roads and some instances rough
terrain, ensuring the load is fully secure and stable. The units shall be suitably protected and prevented
from being knocked against each other or other equipment during transportation.
The Hand Remote Control, battery chargers, USB socket & cables shall be stored in the carry case provided.
ArrowES has designed a secure cage system to transport the eSTOP™ unit with the existing traffic control
equipment loads to avoid additional freight costs. Contact ArrowES for more information.
Material Life
Materials/parts used in the production of the eSTOP™ have been selected based on the manufacturer’s
claim or technical guidance on the material life to meet the requirement of MRTS264.
The lanterns used are type approved by QLD DTMR and meets with specification under AS2144. The
manufacturer of the lantern has claimed that it has a service life of at least 20 years.
All the metallic parts of the eSTOP except for the bolts are made of Aluminium. The bolts are made of
steel. The metallic parts include tripod structure, battery pole including the battery holder, the brackets
on top and the lantern pole.
All the Aluminium parts are of 6060 T5 grade which has the guaranteed minimum mechanical properties
of 6063-T5 as below.
To Next Page
Loading...