Zinc plated steel of grade 8.8 is used for the bolts used in eSTOP. To avoid galvanic corrosion due to contact
between steel and aluminium, one-piece washer and flange made of Minlon (mineral reinforced Nylon) is
used over the Steel bolts. This prevents the contact between steel and Aluminium and hence prevent
galvanic corrosion.
Dulux X15 orange is used for painting the external surfaces of aluminium not in contact with steel, this
meets with requirements of AS2700.
All the Metal parts are sanded, wiped clean, applied a coat of ETCH PRO primer which is non-lead based,
then after it gets dried apply 3 coats of enamel paint which is Dulux X15 orange.
Warranty
The eSTOP™ is supplied with a limited ex-factory warranty for 12 months.
To Previous Page
Loading...