Mirror covers
Motors DC motor with planetary gearing
Controller ASA DC motor controller board
Feedback sensor potentiometer
The covers can also be moved by hand because of the integrated slip clutch that protects the gearing from
damage. The covers are equipped with counter weights, so the weight balance of the telescope does not change
regardless if the covers are open or closed.
Derotator (optional)
The derotator is a separate device mounted to one of the fork sides.
Motor Stepper motor with screw drive
Controller ASA Stepper motor controller board with CAN-bus interface
Feedback sensor high resolution optical absolute encoders
max. rotational speed 6°/sec
max. travel angle 350°
Filter wheel (optional)
For 4 filters with 100x100mm (Filters are not included)
Motor stepper motor with belt drive
Controller ASA Stepper motor controller board with CAN-bus interface
Feedback Sensor ASA magnetic absolute encoder
To Next Page
Loading...