EasyManua.ls Logo

ASA Electronics AZ800 - Page 68

ASA Electronics AZ800
68 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AZ800 user manual - hardware
Created by: MPuchner 07.2019
version: 9600021A
Original user manual
page 68 of 68
printed: 04.03.2020
Some of the dirt will be soaked and stick on the paper towels.
Repeat this procedure 2-3 times.
Now rinse the mirror with more of the distilled water with detergent.
Then wipe with a wet micro fibre cloth or a cotton cloth from top to bottom. Try not to apply any pressure.
Now wash the mirror with pure distilled water to remove the residuals of the detergent.
Again wipe from top to bottom.
Now spray pure isopropanol onto the mirror. The alcohol flows down, takes the residual water with it and dries
without leaving droplets on the mirror surface.
Let the mirror dry.
Do never wipe on the dry mirror surface!
Do never apply pressure when wiping on the mirror surface!
If there are some tiny residual stains on the mirror surface, just leave them there.
If you need any technical assistance, contact support@astrosysteme.at .

Table of Contents