Installing Asanté MacCon Cards 2-27
2 Insert the Asanté EtherTalk Installer Disk.
3 Double-click the Installer icon and click OK when the In-
staller banner appears. The Easy Install dialog box appears
(see Figure 2-17).
∆ Note: To properly install the EtherTalk Installer pro-
gram, you must double-click the Installer icon. Do not
drag the files from the diskette to the System Folder.
Figure 2-17 The Easy Install dialog box
4 To perform an Easy Install, click Install. The Installer pro-
gram examines your Macintosh and installs the appropri-
ate EtherTalk driver and the current AppleTalk.
To perform a Customize install (only experienced Macin-
tosh users should perform a customized installation):
— Click Customize. A dialog box appears with a list of soft-
ware options.
— Select the appropriate software options. Use Shift-click
to select multiple operations.
5 Click Restart when you are prompted to do so.
∆ Note: If other Macintoshes on the network have Asanté
EtherTalk drivers, we recommend that you upgrade all
drivers to the most recent version.
To Next Page
Loading...
Need help?
General