EasyManuals Logo

Asante MacCon Family Ethernet Network Cards for the Macintosh User Manual

Asante MacCon Family Ethernet Network Cards for the Macintosh
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Using TroubleShooter and ADLS Diagnostic Software 4-3
Memory Buffer Test
Writes to and reads from the packet buffer RAM to ver-
ify its addressability and operation.
Network Interface Controller Test
Writes to and reads from the controller register to ver-
ify its operation. Also issues a transmit command to ver-
ify the network interface controller’s integrity.
Ping-Pong Test
Transmits and receives special packets to verify com-
munication with other systems on the network.
If the Ping-Pong test fails, check your connectors and
cables.
Note: The Ping-Pong Test requires at least one other Mac-
intosh in EtherTalk Phase 1 or Phase 2 on the network.
5
TroubleShooter opens the TroubleShooter window and
displays results from the following tests:
Figure 4-2
TroubleShooter window
Running other TroubleShooter tests
The Loopback and Bandwidth Utilization tests are available in addition
to the three default tests for validating the MacCon adapter.
Ping-Pong Test Passed
E

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asante MacCon Family Ethernet Network Cards for the Macintosh and is the answer not in the manual?

Asante MacCon Family Ethernet Network Cards for the Macintosh Specifications

General IconGeneral
BrandAsante
ModelMacCon Family Ethernet Network Cards for the Macintosh
CategoryNetwork Card
LanguageEnglish