EasyManuals Logo

Asante MacCon Family Ethernet Network Cards for the Macintosh User Manual

Asante MacCon Family Ethernet Network Cards for the Macintosh
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Chapter 2
A-1
Appendix A
23 2
Technical Specifications
MacCon Specifications
The specifications for the Asanté MacCon cards are given below.
Systems supported Macintosh SE, SE/30, IIsi, LC family, Color Classic,
Quadra, MacII (NuBus) family, Centris, and Per-
forma computers with an available expansion slot
Standards supported IEEE 802.3 Ethernet specifications for thick
(10Base5), thin (10Base2), and Unshielded
Twisted-Pair (10BaseT) media; Phase 1 and Phase
2 EtherTalk. Register-level compatible with Apple
Computer’s Ethernet cards
Software supported AppleShare, Novell NetWare for Macintosh, 3Com
3+Open, 3Com 3+Share, Sitka TOPS, DEC Path-
works, A/UX and other popular network software
Protocols supported AFP, TCP/IP, DecNet, and LAT
Math co-processor Motorola 68882 PLCC math co-processor available
for MacCon IIsi, 30i, and LC cards
Address selection
(IIsi only)
4 user-selectable slot addresses: 9, A, B and E
Power requirements +5V @ 1300 mA max. (thin)
+5V @ 1000 mA max (UTP)
+12V @500 mA max (thick)
+5V @800 mA max. (LC Series)
Operating temperature 0˚ to 50˚ C
Relative humidity: 10% - 90%, non-condensing
Warranty 5 years
MacConi Appendix A Page 1 Friday, August 23, 1996 10:06 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asante MacCon Family Ethernet Network Cards for the Macintosh and is the answer not in the manual?

Asante MacCon Family Ethernet Network Cards for the Macintosh Specifications

General IconGeneral
BrandAsante
ModelMacCon Family Ethernet Network Cards for the Macintosh
CategoryNetwork Card
LanguageEnglish