Page 22 Version 2.14 Maintenance and Service Manual
By shortly pushing the brown button (0.5 sec.) on the radio receiver the LED begins to flash for approximately
4 seconds.
Button
Press now within this 4 seconds the UP or DOWN
button on the remote control (handheld or wall
mounted).
The radio receiver will now identify and memorise the
frequency of the unit.
If you wish to erase all memorised remote controls, push and hold the brown button on the radio receiver
for more than 3 seconds. After that the LED shines for approximately 2 seconds.
All the frequencies are now erased from the memory!
To Next Page
Loading...
