46
Getting startedPhone number listsDuring a callDiversionSMS/BroadcastSecurity settings
Ringing type (7-1-1-7)
You can fine-tune the set ringing melodies
by means of the following options:
– Ring Once
The specified melodies are played only
once when a call comes in.
– Increasing
The specified melodies are played at the
lowest volume at first and keep on get-
ting louder each time they are repeated
until the maximum volume is reached.
–
Continuous
The specified melodies are played at the
set volume repeatedly until you answer
the call or mute it.
This is the standard setting.
–
Silent
The specified ringing melodies are
switched off. As a reminder you see the
( symbol in the status line.
– Beep Once
When a call comes in, you are alerted not
actually by a melody, but by a short single
beep.
To set the ringing type for the ringing melo-
dies:
Select
Menu > Settings > Sound & Alert >
Ringing > Ringing Type
The list of possible settings is
displayed
Press
Change
Scroll to the desired ringing type
Press Select
Tones on/off (7-1-2 / 7-1-3 /7-1-4)
You can switch alerting tones on or off.
The ringing tone may be switched off in the
Ringing Type menu (see above). Earset alerting
can also be switched on and off in the Ringing
menu (see page 45).
}Message tone (7-1-2)
When you receive a text message your mo-
bile phone emits a message tone.
Select
Menu > Settings > Sound & Alert >
Message Tone
The current setting is displayed
Press
Change
Press Save
}Keypad tone (7-1-3)
This sets the tone off/on, you hear when you
press the mobile phone´s keys.
Select
Menu > Settings > Sound & Alert >
Keypad Tone
The current setting is displayed
Press
Change
Press Save
}Warning tone (7-1-4)
This sets the warning and error tones off/on.
You will hear it when e. g. connecting acces-
sories or after making wrong entries with the
keypad.
Select Menu > Settings > Sound & Alert >
Warning Tone
The current setting is displayed
Press
Change
Press Save
To Next Page
Loading...
Need help?
General