ASCOM 21 User Manual

8
Getting startedPhone number listsDuring a callDiversionSMS/BroadcastSecurity settings
Making and receiving calls
To make calls you have to be logged in to a
network and the signal strength must be
adequate.
If in SAT mode the SAT icon 2 is flashing,
make sure that the mobile phone has a clear
view of the sky so that proper registration
can take place.
Note:
For more information about making and
receiving calls, see ’Options during a call’ on
page 17.
}Dial using the keypad
To dial a number in the ’traditional’ way:
Enter the number via the keypad.
For international calls press
0
first, until + is displayed.
Then enter the country code with-
out a leading ’0’
Press ,
Note:
To add a pause in your dialling string you
may long press the
%
key (p is displayed
to indicate the pause).
End a call
Press
.
}Receiving a call
When you receive a call this is indicated in
several ways:
– You hear the ringing tone (melody and
volume according to the current setting)
– The % symbol is displayed
– The calling number is displayed if it is
transmitted. If the number is stored in
the phonebook, the corresponding name
is displayed instead of the number
Incoming calls (examples):
Accept a call
Press
,
Reject a call
Press Reject or
.
Turn ringing off
If you are called in a situation when ringing is
disturbing, you have the option to turn the
ringing tone off temporarily while the incom-
ing call is being signalled:
Press Silent
Silent
!
$
+6547895894
%
!
$
John Fox
%
Reject
Silent
Reject

ASCOM 21 Specifications

General

Brand	ASCOM
Model	21
Category	Marine GPS System
Language	English