TD 92022EN
3 July 2013 / Ver. G
Installation Guide
H/U952T Terminal Transmitter
15
7 Document History
Version Date Description
A 13 November 2002 First version
B 6 July 2006 Information and requirement for On-board
installation have be
en added to t
he document.
C 16 May 2007 Insert of regulatory text for EU & EFTA
D 3 March 2011 Added text to section Regulatory Compliance
Statem
ents
.
3.4 Wiring Runs on page
8 Information about that is
not allowed to make an openings on the front cove
r
added.
3.8 Coax Connection to Antenna on page 11
In
formation about the antenna cable added.
Galvanic isolation added.
3.1 Mounting on page 6 Figure an
d text about
mounting vertically added.
3.6 Connection of Supply Voltage on page 10
external fuse added.
Minor changes
E 11 May 2012 Added instruct
ion to protect the unit against
current exceeding 20 A.
Added FCC Co
mpliance Statements.
Changed references to system documents.
Renamed old systems to Ascom Paging System.
Removed section Connection to Slave Transmitter.
Removed H/U989M Monitor Receiver.
Removed H/U954 Power Amplifier.
Minor text changes.
F 12 April 2013 Added note to 3.6 Connection of Supply Voltage on
page 10 abou
t recommendation to avoid potential
power supply disturbances.
G 3 July 2013 In Appendix B: Coaxial Connectors on page 18:
Added information about an additional brand of the
TNC coax c
onnector.
To Next Page
Loading...
Need help?
General
