ASCOM IP-DECT Base Station - Configure the Slave

Document History
INSTALLATION GUIDE
IP-DECT Base Station and IP-DECT Gateway
6 Document History
Version Date Description
Ver. A 31 May 2013 First released version.
Ver. B 15 October 2014 Updated section DIP Switches on page 21. (Issue IPDECT-1328)
Updated section 3 Installation of the Base Station on page 24
regarding that it is recommended to mount the Base Station at least
30 cm away from a metal surface. (Issue IPDECT-1625)
Ver. C 1 October 2015 Updated section DIP Switches on page 21. (Issue IPDECT-1745)
Ver. D 24 January 2020 Added IPBS3 where it is applicable.
Ver. E 25 January 2021 Updated regulatory information in 3.3.3 Power the Base Station with a
Local Power Supply, page 23.
Updated AC-adapters in 2.6 AC-adapter, page 14.
Added information about fan replacement in 4.4 Fans Replacement,
page 29.
Added information about attaching Base Stations in 3.2.1 Fix the
Mounting Bracket to a Wall, page 16.
Updated Max current consumption in 4.1 Install the IPBL, page 25.
Added a note about old IPBL power supply in 4.3.1 110/230 VAC, page
28.
31
TD 92989EN / 25 January 2021 / Ver. E