ascon M3 Series - Mnemonic Codes Setting

Unit
°C
Unit
°f
Unit
°C
Unit
°f
Unit
none
Unit
ph
23
4 - Operations
Engineering
Units
Degree
Centigrade
Degree
Fahrenheit
Degree
Centigrade
Degree
Fahrenheit
no units
defined
Ph
4.3.2 MNEMONIC CODES SETTING
(e.g. configuration see page 35)
Press the $ or % to display the next or previous mnemonic for
the selected parameter.
Continued pressing of $ or % will display further mnemonics at
a rate of one mnemonic every 0.5 sec. The mnemonic displayed at the
time the next parameter is selected, is the one stored in the parameter.