ASEM CPU 1021/A - Page 54

CPU 1021/A User’s Guide
46 Asem S.p.A.
SATA Port 2
Multi-Sector Transfers
• Sets the number of sectors that the disk can access at the same
time
LBA Mode Control
• LBA (Logical Block Addressing) must be activated for disks with a
capacity of more than 528MB.
32 Bit I/O
• This setting enables or disables 32 bit IDE data transfer .
Transfer Mode
• Determines method of data transfer from or to drive.
Ultra DMA Mode
• Determines the Ultra DMA data transfer mode.
SMART Monitoring
• This function monitors the hard disk and identifies any problems
with them.
SATA Port 3
Multi-Sector Transfers
• Sets the number of sectors that the disk can access at the same
time
LBA Mode Control
• LBA (Logical Block Addressing) must be activated for disks with a
capacity of more than 528MB.
32 Bit I/O
• This setting enables or disables 32 bit IDE data transfer .
Transfer Mode
• Determines method of data transfer from or to drive.
Ultra DMA Mode
• Determines the Ultra DMA data transfer mode.
SMART Monitoring
• This function monitors the hard disk and identifies any problems
with them.