ASG DTT-10 User Manual

ASG, Division of Jergens, Inc.
15700 S. Waterloo Road | Cleveland, OH 44110-3898
Phone: (888) 486-6163 | Fax: (216) 481-4519
Email: asginfo@asg-jergens.com | Web: www.asg-jergens.com
Page 1 of 23
© 2017 Jergens, Inc. All Rights Reserved | Revision Date: 04/10/17
DTT Series Digital Torque Testers
User Manual
for DTT Models above Serial Number: 2000

ASG DTT-10 Specifications

General

Brand	ASG
Model	DTT-10
Category	Test Equipment
Language	English

Summary

Service and Warranty

Overload Capacity Caution

Standard Equipment

Rundown Adapter Usage Guide

Provides a comprehensive list of ASG rundown adapters and their specifications for DTT/DTT-L series.

Usage

Manual Torque Driver Test

Step-by-step procedure for testing manual torque drivers using the DTT meter.

Power Screwdriver Test

Step-by-step procedure for testing power screwdrivers with the DTT meter.

Main Menu Functions

Settings Configuration

Accessing and navigating the setting options within the DTT's main menu.

Auto Reset Feature

Explains the Auto Reset feature for automatic peak reading resets in peak mode.

Pass-Fail Limit Setup

How to set and use the Pass-Fail feature for torque range validation.

Automated Memory and Print

How Auto Memory stores readings and Auto Print sends measured values automatically.

Calibration and Transducer Status

Software and Data Handling

Torque Link 2.4 Overview

Introduction to TorqueLink 2.4 software for enhancing DTT functionality and data analysis.

Downloading Data from DTT

Step-by-step guide to download data from the DTT meter to the PC using TorqueLink.

Capturing Real-Time Peak Data