54
5. SSID: A name whose length is less than 32 characters is used to identify a
wireless network. WiFi devices automatically detect all networks within its
communication range.
6. Hide SSID: If [Yes] is selected, SSID does not show in site surveys by wireless
mobile clients and they can only connect to wireless router by manually entering
SSID.
7. Authentication Method: This field enables authentication methods for wireless
clients.
8. WPA Encryption: Enable WPA Encryption to encrypt data.
9. WPA Pre-Shared Key: Requires a password of 8-63 characters (letters, numbers
or a combination) or 8 - 64 hex digits to start the encryption process.
10. Protected Management Frames: Protected Management Frames is a feature to
protect some types of management frames like deauthorization, disassociation
and action frames.
11. Max Clients: The maximum number of clients allowed.
12. Network Key Rotation Interval: This field specifies the interval (in seconds)
after which a WPA group key is changed. Enter [0] (zero) to indicate that a
periodic key-change is not required. Please input the value between 600 to 86400
(seconds).
13. Click Apply.
To Next Page
Loading...
