73
1. Add new folder.
2. Enter a folder name. The folder that you created will be added to the folder
list.
To set up permissions on the folder for Samba server:
1. From the list of folders, choose one of the shared folders and add the share
name, and choose the type of access permission that you want to assign for
specific users:
R/W: Select this option to assign read/write access.
R: Select this option to assign read-only access.
No: Select this option if you do not want to share a specific file folder.
2. Click Save Permission to apply the changes.
Refer to the following descriptions:
Device Name: Enter a name for your device and you can use this name in your
web browser's URL field to quickly access the device as a Network Place
service.
Work Group: Group name of the cascade in Network Neighborhood.
Note: The standard input characters include letters (A-Z, a-z), digits (0-9). The
hyphen (-) and under line (_) characters may also be used, but not as the first
character.
Guest Login: By enabling [Guest Login], any user in your local network can
access your network place (Samba) without authentication.
Safely Remove Disk: Click to safely remove the disk. When the USB disk is
ejected successfully, the USB status shows 'No device '.
Click Save Permission.
To Next Page
Loading...
