41
❑
Dryer Installation
1. Installation Order
1 Place the dryer on the flat ground. Keep the unit at least 12 inch away from the wall.
2 Check the 4 legs and the gap between the unit and floor. The dryer should stand stably when
you try to move the unit to the left or right.
➤ Balance the unit on the floor with the leg adjust as so that the inclination is not greater than 1 inch.
2. Outlet Duct Connection
➤ Never use a plastic or aluminum foil duct.
➤ Use a durable 4-inch metal duct (the duct outlet is provided
with the dryer. Ask local shops for an additional duct).
➤ Make the duct outlet the shortest possible length.
➤ Clean the duct before installation.
➤ Do not use a bent duct.
➤ Use aluminum tape for connection and rub for close
adhesion.
To Next Page
Loading...
