Asko WM70 - Program Selection and Settings (WM70.3); WM70.3 Program Selection and Options

Service manual WM70
18
Program selection, options and making settings WM70.3
Programme selector use on standard machines
1
2
2
1. Press the program selector button to navigate
between the different menus (e.g. to go
from temperature menu to spin menu).
2. Press the small arrows to make a selection in
the menus (e.g. select 1400 rpm). Confirm the
selection and go to the next menu by pressing
the program selector button.
3. Press Start/Stop to start. Hold Start/Stop in
for 3 seconds to exit the current program.
Programme selector use on built-in machines
1
2
2
1. Press the program selector button to navigate
between the different menus (e.g. to go
from temperature menu to spin menu).
2. Turn the program selector button to make a
selection in the menus (e.g. select 1400 rpm).
Confirm the selection and go to the next
menu by pressing the program selector button.
3. Press Start/Stop to start. Hold Start/Stop in
for 3 seconds to exit the current program.
Delayed start
Choose the number of hours that
you want to delay the start by.
Remember to press the button
Start/Stop.
Super rinse
Add extra rinses.
Temperature
Program
See program table
High water level
Extra water is used during the main wash and
rinse cycles, resulting in the load being treated
with greater care.
1 Auto
Done 10:40 09:2060
o
C 1200
Start/Stop
Press to start a programme.
Press and hold for three seconds to stop
a programme.
ClockFinish time
Door opening
Press once to open the washer
door.
Options
.ORMAL RINSE
.ORMAL WATER LEVEL
Economy rinse
Remove rinses.
Spin
Max varvtal varierar beroende på val av program.
.O SPIN
.O DRAIN
The washing remains covered by the water
from the final rinse and therefore will not
become creased.
Main power switch
Program selector
Fully built-in machine
Program selector
Standard machine