Asko WM70 - Program Selection and Settings (WM70.2); WM70.2 Option Selection

Service manual WM70
26
Make settings WM70.2
Option selectionl WM70.2
Press
-/+
Comments/Instructions
90°C
Temper ature
Selection of temperatures between Cold and 90°C. Cold is the same as
the incoming water temperature. For program 8 and 9, the maximum
temperature is 40°C, for program 10, the maximum temperature is 60°
80°C
70°C
60°C
50°C
40°C
30°C
20°C
-°C Cold, no hetaing of the incoming water
Spin
Option of choosing spin speed between 400 and 1800 rpm. Spinning at
400 – 800 rpm signifies a short spin.
Program 8 and 9 cannot be selected at speeds greater than 800 rpm.
1800
1700
1600
1500
1400
120 0
1000
800
400
0
h.O SPINv MEANS THAT THE PROGRAM DOES NOT INCLUDE A SPIN CYCLE AND ENDS
by draining
.OD
h.O DRAININGv MEANS THAT THE PROGRAM DOES NOT INCLUDE A SPIN CYCLE AND
ends with the water from the final rinse still in the machine.
1-24 h
Delayed start
Door opening
Press once to open the
washer door.
Temperature
Spin
Options buttons
Program selector
Turn to choose between the different
programmes.
Anticrease
Super wash
High waterlevel
Super rinse
Delayed start
An estimate of the
remaining time is
shown when the
machine is running.
Start/Stop
Press to start a programme.
Press and hold for three seconds to stop or
change a programme.
Presoak
Program
See program table