Asko WM70 - Service Menu Operations; WM70.3 Service Menu Access and Navigation

Service manual WM70
31
Service menu WM70.3
Program selector
1. Press the program selector button to scroll between the various service
menus.
2. Turn the program selector button to make a selection between the menus
(e.g. set a certain water inlet). Confirm the selection and go to the next menu by
pressing the program selector button (1).
3. Press the Start/Stop button to confirm the settings and exit the service menu.
This is how to enter the service menu
If the machine is on: First switch the power off with the main power switch.
+
Press the program selector (S1) at the same time as the Main power switch.
3x
Press the program selector button 3 times within 5 seconds. You are now in
THE SERVICE MENU SHOWN IN ,#$  3EE INSTRUCTIONS BELOW FOR NAVIGATING THE
service menu.
Program selector button for integrated machines
2
1
2
3
1. Press the program selector button to scroll between the various options.
2. Press the small arrows to make a selection between the options (e.g. set a
certain water inlet). Confirm the selection and go to the next option by pressing
the program selector button (1).
3. Press the Start/Stop button to confirm the settings and exit the service menu.
3
1
2
2