Asko WM70 - Replacing Internal Components; Replacing Panels and Control Unit

Service manual WM70
49
Replacing panels, control unit and detergent compartment
Instruction Image
1. Attach the anti-static
wristband to a part of the
machine that is earthed!
./4% !N ANTISTATIC
wristband must be used,
otherwise you risk destroying
the control card.
2. Unscrew the top cover..
3. Remove the top cover.
4. Use a screwdriver to
carefully free the panel. As
you do so, carefully angle the
panel outwards.
5. Remove the panel and the
CABLES ./4% $ONT FORGET TO
remove the pressure sensor
tube.