Assa Abloy CLIQ - Connecting Mobile PD to iOS Device

38
EN
Bluetooth pairing guide (PAN)
Connecting the Mobile PD to an iOS device
Note!
The device and the software must support the function: The following descrip-
tions apply to the iPhone 4 (iOS 4.3) or higher.
Once-only pairing of the mobile programming device with the iOS device:
Note that the Bluetooth pairing procedure described here needs to be completed
only once, as long as the iOS device used with the Mobile PD is not replaced.
Activate Bluetooth
1 Start the Settings app.
2 Choose Bluetooth.
3 Turn the slider to ON.
 You have activated Bluetooth.
Fig. 4:
Activating
Bluetooth
I