60
EN
Creating the trace log
Prepare a USB memory stick
Note!
A USB memory stick is required for reading the trace log: To read the Bluetooth
Mobile PD trace log, a USB memory stick is needed. The USB memory stick must
be formatted with a FAT file system (for example FAT32).
1 Copy the usbtrace file to the root folder of the USB memory stick. Make sure
that no other Mobile PD configuration files exist in the root folder of the USB
memory stick.
2 Connect the USB memory stick to the Mobile PD using a USB on-the-go cable.
You have connected the USB memory stick to the Mobile PD.
Fig. 20:
USB on-the-go
cable
Article no.: VZ08
I
To Next Page
Loading...
