2
ML2000 Series Mortise Lock
Installation Instructions
Used with VN Escutcheon Trim and V Series Indicators
FM521 08/19
Copyright © 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
TOC Table of Contents
1 Tools Required ..................................................................3
2 Indicator Variants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3 Mortise Lock Handing Instructions ...............................................4
4 Rehanding Indicator (if necessary) ...............................................5
5 Installation Instructions .........................................................6
a Prepare Door ....................................................................6
b MUSÉO® LEVERS ONLY: Attach Levers to Escutcheons ............................6
c Install Lock and Outside Trim ....................................................6
d Install Cylinder ..................................................................7
e Install Inside Trim ................................................................7
f STANDARD LEVERS ONLY: Attach Levers ..........................................8
g Install Outside Front .............................................................9
h Perform Functional Check .......................................................9
6 Indicator Parts ................................................................. 10