40
ASSA ABLOY Hospitality
66 8003 015-3
default 0 hours is used, there is no limitation in time for the setback override
and it can be set until further notice.
5. Unit: The temperature unit (Fahrenheit/Celsius).
Note: Changes to the temperature unit will be broadcasted to all thermostats.
8.2 Maintenance
At Tools/Options/Energy management/Maintenance, it is possible to specify
three different thermostat maintenance intervals in hours; 0-65535 hours. This is
the number of hours of runtime that should pass before an alarm is triggered. It is also
possible to rename the three maintenance intervals.
Maintenance counter 1 is for fan time/total HVAC time
Maintenance counter 2 is for ‘cooling’
Maintenance counter 3 is for ‘cooling or heating’
1. Enter the applicable maintenance value(s) in hours.
2. If applicable, rename the three maintenance counters to your needs.
3. Click OK.
To Next Page
Loading...
Need help?
General