Assa Abloy Orion User Manual

23
ASSA ABLOY Hospitality
66 8003 015-3
1.8 Operator templates
The operator templates decide the level of authority for different Orion EMS
operations. To change the authority for handling thermostat parameters:
1. Double click on Operator
templates under the Lists
tab in the navigation window.
2. In the Operator templates
dialog, mark the applicable
operator template and click
Properties; or click Add
if a new operator template
should be added.
Figure 6
3. In the Operator template details
dialog, choose the tab Energy
management in the left part
of the dialog. Make the desired
changes regarding
- changing basic parameters
- changing advanced parameters
- setting the room temperature
- overriding setback mode
Note: By default, all four items
above are marked for system
manager but unmarked for
other operator templates.
4. If a new operator template was
added, go through the other tabs
in the left part of the Operator
template details dialog and fill
in the applicable information;
see Setup manual Visionline
for detailed information.
5. Click Update (or Save if a new
operator template was added)
and Close.
Figure 7

Assa Abloy Orion Specifications

General

Brand	Assa Abloy
Model	Orion
Category	Thermostat
Language	English